Guess I'll start things...my pursuit of the perfect electronics enclosure.


Results 1 to 10 of 10

Thread: Guess I'll start things...my pursuit of the perfect electronics enclosure.

  1. #1
    Registered
    Join Date
    Nov 2009
    Location
    USA
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Guess I'll start things...my pursuit of the perfect electronics enclosure.

    So I was daydreaming, and got a handful of connectors and misc electronics parts from work, which made me think I needed something to put them in.

    So I jumped the shark and decided to design the perfect "industrial" Shapeoko control package with the electronics that I pretty much already have.

    I am still firmly in the design phase. I have attached two 3D PDFs - one with the full chassis, and the second has the lid and side panels hidden so you can see the goodies inside.

    There is a ton I still have to do - I have to:

    [ul][li]figure out the electrical connections for the teensy++2.0 using Generic HID to interface the switches, LEDs in the buttons, and the two relays for AUX A and AUX B. (Not exactly my area of expertise)
    [/li][li]do the legends for the rear panel[/li][li]Add the fans to my power interconnects[/li][li]design all cables[/li][li]and buy a 19" rack.[/li][/ul]
    I am planning on putting my CNC PC into a 3U or 4U enclosure as well. Wondering if I should try to find a keyboard tray and rack monitor to complete the look. A small toolbox or drawers in the rack would be nice as well.

    I'd love some input from the community. I'm more of a LRU integration guy than a transistor and resistor guy.

    Name of the game is cheap! My total cost for the machine was 400, and have about 200 into electronics.

    http://www.40mmdesign.com/stuff/Shap...ol_Unit_4U.PDF

    http://www.40mmdesign.com/stuff/Shap...U_No_Cover.PDF

    Edit: Apparently the 3D PDFs aren't working for most people...

    Here are some screengrabs:










    My biggest problem with some of this is mounting the main control board (the big blue one) - It is a Chinese 5 axis CNC controller, that only has the 4 mounting holes on the board. the heaviest components are dead centerline horizontally across the board. It sags in the middle when mounted to standoffs. So, I added a piece of non-conductive high temp rubber (6" square) under the PCB to help support it. Couldn't think of any other cheap ideas to safely support it and keep it from shorting.

    My next problem is the teensy++2.0 - I'm planning on using it to to interface the control panel to PC - I have one pin from a 20 pos pin header to attach 18 wires to, and I'm not sure the best method to do so.

    I've decided to go with the Chinese wireless pendant as the primary controller, and have eliminated the left two thirds of the control panel shown, with the exception of the e-stop and the superPID display. (Next batch of screenshots will reflect the change)

    And yes, I am building what would be regarded as a toy by some - its a Shapeoko 3 axis router using a DW660 trim router as a spindle. Eventually I'd like to save up enough to snag a G0704, and use this electronics package to run it, along with the NEMA 23s I'm using on the Shapeoko.

    I would love your input!

    Similar Threads:
    Last edited by j.steensen; 02-24-2013 at 11:13 AM.


  2. #2
    Gold Member doorknob's Avatar
    Join Date
    Jan 2010
    Location
    USA
    Posts
    2141
    Downloads
    0
    Uploads
    0

    Default

    What tool did you use to model and draw the 3D illustrations? They look extremely cool.

    Also, are you building the enclosure from scratch or are you using a commercial cabinet of some sort?



  3. #3
    Registered BAMCNC.COM's Avatar
    Join Date
    Sep 2012
    Location
    USA
    Posts
    1543
    Downloads
    0
    Uploads
    0

    Default Re: Guess I'll start things...my pursuit of the perfect electronics enclosure.

    I have same question about software.



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default

    Why are you building the "Perfect Enclosure" around the cheapest drive available?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Registered
    Join Date
    Nov 2009
    Location
    USA
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by doorknob View Post
    What tool did you use to model and draw the 3D illustrations? They look extremely cool.

    Also, are you building the enclosure from scratch or are you using a commercial cabinet of some sort?
    SolidWorks. I'm a mechanical designer/lead draftsman for one of the Army UAVs for the day job.

    Going to use a 4U 19" rack mount enclosure from Hammond. Little pricey, but I'm definitely not a sheet metal guy. Usually, I'm working on payloads for the AV - fitting 50 pounds of LRUs into a space meant for 10.

    Quote Originally Posted by ger21 View Post
    Why are you building the "Perfect Enclosure" around the cheapest drive available?
    Because it's what I have. Eventually, I do plan to upgrade to a geckodrive.



  6. #6
    Registered BAMCNC.COM's Avatar
    Join Date
    Sep 2012
    Location
    USA
    Posts
    1543
    Downloads
    0
    Uploads
    0

    Default Re: Guess I'll start things...my pursuit of the perfect electronics enclosure.

    Jeez, I thought working on wind turbines was neat... Lol



  7. #7
    Registered
    Join Date
    Nov 2009
    Location
    USA
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default

    So no comments on the actual enclosure? C'mon gentlemen! :-)



  8. #8
    Gold Member doorknob's Avatar
    Join Date
    Jan 2010
    Location
    USA
    Posts
    2141
    Downloads
    0
    Uploads
    0

    Default

    I'd be interested in more details on how you intend to use the teensy++2.0 (having both USB and parallel interfaces and software running?) as well as a list of the controls/switches and functions (I can read the legends from the renderings, but I'm not certain of all of the intended functions - feedrate multiplier?).



  9. #9
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default

    Often the estimated enclosure size turns out to be far less than is actually required, Murphy's law!
    There is also the method used for wire dressing and troughing or wire duct, if used.
    Which also takes up room and is dependent on wire capacity.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  10. #10
    Registered
    Join Date
    Jul 2011
    Location
    Kanada
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    Well, you're certainly putting my case to shame and made me think that I probably need to add a whole bunch more junk to it lol. No idea how to wire up all of the over ride controls you have there with a Gecko drive so I guess I'm gonna have to look into it.

    Case looks awesome! I use Catia but I'm gonna have to start learning Solidworks. I imagine the only things I'll model up will be the front and back panels for laser cutting. I wasn't even planning on having a front panel until I saw this. Awesome job, looking forward to seeing the next renderings.

    What are the connectors you have in there for the motors?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Guess I'll start things...my pursuit of the perfect electronics enclosure.

Guess I'll start things...my pursuit of the perfect electronics enclosure.