Build Thread Prusa I3 with aluminum Upgrades - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 14 of 14

Thread: Prusa I3 with aluminum Upgrades

  1. #13
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    305
    Downloads
    0
    Uploads
    0

    Default

    I am not sure about that setting. I am using Marlin as a firmware. Would it be in the firmware? Notice the X axis move towards the home position. That is NOT in the g-code either. It will also do the Y axis. Maybe there is something aroudn teh retract at temp you referenced, impacting the X & Y moves.



  2. #14
    Registered
    Join Date
    Oct 2010
    Location
    USA
    Posts
    317
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by rcazwillis View Post
    I am not sure about that setting. I am using Marlin as a firmware. Would it be in the firmware? Notice the X axis move towards the home position. That is NOT in the g-code either. It will also do the Y axis. Maybe there is something aroudn teh retract at temp you referenced, impacting the X & Y moves.
    If you upload the Configuration.h to Pastebin.com - #1 paste tool since 2002! and put the link here I can check it out, otherwise you may just have a bad firmware upload...maybe try a new download?



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Prusa I3 with aluminum Upgrades

Prusa I3 with aluminum Upgrades

Prusa I3 with aluminum Upgrades