Need Help! Amada Laser down

Results 1 to 1 of 1

Thread: Amada Laser down

  1. #1
    Member MHUNT77's Avatar
    Join Date
    Apr 2023

    Default Amada Laser down

    Hello! Brand new to the forums, hope that I am posting this in the right place. I work for a small metal fabrication shop and operate an AMADA LCG 3015 CO2 laser.
    Everything was going fine until one day I came in and tried to open the Dr. ABE nesting program. Every time I try and open it there is an error saying this program cannot open because its side by side configuration is incomplete.
    We have talked to AMADA and they don't know (or doesn't know what to do, they tried) what is going on an apparently our software support has run out. So my employer has decided to update the software at some point in the future, but we are trying to find
    some sort of way to get the machine back up and running until then. I decided to try here. I would appreciate any help. Thank you very much.

    Similar Threads:

  2. #2

    Default Re: Amada Laser down

    If you need AMADA software including technical support, you can contact me. Dr. ABE Blank

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on

Our Brands

Amada Laser down

Amada Laser down