Need Help! General CNC 24x36 Router


Results 1 to 2 of 2

Thread: General CNC 24x36 Router

  1. #1
    Registered
    Join Date
    May 2007
    Location
    CANADA
    Posts
    20
    Downloads
    0
    Uploads
    0

    Question General CNC 24x36 Router

    Does anyone have any experience with the general CNC junior routers. I'm strongly considering purchasing a router within a year or so and wonder how they measure up to others, please specify.
    I'm looking for something under $15,000 that is reliable with as much travel xyz as you can get for this $ . . . and with sufficient 3d programming software.
    I'm open to all comments and suggestions.
    Thanks

    Similar Threads:


  2. #2
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    the machine is extremley over priced and under supported, recently thye developers bankrupted the gorrila company while knowingly moving along with general, leaving all original owners without warrantys

    the info is here

    http://www.cnczone.com/forums/forumdisplay.php?f=391

    camaster< and shopbot both have industrial quality 24x36 machines due very soon at prices under 5000. the romax has a 24x36 but the working area is less, also under 5000.00us if i were this close to a new model release i would check it out

    www.camaster.com ask for the stinger

    i believe shopbots is called the tyro

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

General CNC 24x36 Router

General CNC 24x36 Router