New Machine Build Jtech with Velox 6262 Running Mach 3


Results 1 to 5 of 5

Thread: Jtech with Velox 6262 Running Mach 3

  1. #1
    Member Aerial_Avionics's Avatar
    Join Date
    Feb 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Jtech with Velox 6262 Running Mach 3

    I've been running my velox 6262 CNC for 8 months now, but recently I've been looking into upgrading with Jtech's spindle mount 7W laser for engraving my powder coated aluminum pieces.
    I ordered the warp9 ESS, BOB, and ribon cable just how it shows on jtech's website, but here's the issue I foresee:
    Neither my PC nor CNC control box has DB25 connections. Just straight up ethernet to ethernet port.

    How would I connect my PC running Mach 3 to both the laser driver and CNC driver?
    USB to Ethernet adapter for one of them?

    Thanks!

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2007
    Location
    Canada
    Posts
    483
    Downloads
    0
    Uploads
    0

    Default Re: Jtech with Velox 6262 Running Mach 3

    How do you attach your computer to your current BOB? If you do not have a db25 connection to your BOB why did you get a ESS? The BOB should connect to both the lazer and cnc driver.



  3. #3
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Jtech with Velox 6262 Running Mach 3

    The ESS has three "parallel" ports. You just need a DB25 to IDC26 adapter.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Member Aerial_Avionics's Avatar
    Join Date
    Feb 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Jtech with Velox 6262 Running Mach 3

    After sleeping on it I'm starting to realize that I may need to just open my CNC electrical enclosure and tap directly into the CNC's ESS. Sorry, that was a rooky post

    Last edited by Aerial_Avionics; 02-26-2021 at 11:07 AM.


  5. #5
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Jtech with Velox 6262 Running Mach 3

    No, everything should go through the ESS.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jtech with Velox 6262 Running Mach 3

Jtech with Velox 6262 Running Mach 3