Some info about your machine might help.
was cutting small project 5 in by 5 in and power supply browned out, meaning fluxuated and machine now wants to cut project size of 12 in by 12 in,I can't get it to reset to original size of 5 by 5. have reset all parameters on machine and reloaded program from computer to usb stick and it still wants to cut 12 by 12. can anyone please advise me what to do?
Similar Threads:
Some info about your machine might help.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I have also gone back into my collection and pick a project that I have completed successfully. and I cannot get it to recognize it. it just waants to go back to the 12 by 12
It might have corrupted the steps per unit settings when the power went sideways. Have you checked that, by commanding a move of known length and comparing expectation to achievement?
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]