- Laguna IQ CNC - Z -Axis too deep
-
Member
Laguna IQ CNC - Z -Axis too deep
Hello,
I am learning how to use a CNC machine. My friend let me borrow his Laguna IQ HHC and I started using V-Carve. I checked out a couple of tutorials and was able to get my first cut completed.
My only problem that I can't figure out is how deep the cut is. I am using a 3/4" scrap of MDF . I can not figure out why the cut is in .278". I would like it to be .050 deep.
Any guidance is appreciated.
Similar Threads:
-
- Laguna IQ CNC - Z -Axis too deep
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules