Newbie How can I upgrade my firmware in my General CNC I-carver machine?


Results 1 to 4 of 4

Thread: How can I upgrade my firmware in my General CNC I-carver machine?

  1. #1
    Member netrate's Avatar
    Join Date
    Dec 2018
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default How can I upgrade my firmware in my General CNC I-carver machine?

    Is there a way to upgrade my firmware safely on my machine :

    HMI FILE : 1.006.J2

    Firmware 1.004

    General CNC i-Carver: 40-915 X

    Similar Threads:


  2. #2
    Member phillipjohnw's Avatar
    Join Date
    Mar 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Since you haven't gotten any help here, I'll try. I don't have a lot of cnc experience, but I have an I-carver that I am slowly figuring out. Try to get in touch with Steve Stevenson or Jeremy Stevenson from Iconic/Axiom CNC. They worked for General CNC before it shutdown and then went on to create Iconic CNC, which was recently purchased by Axiom. Steve especially has been extremely helpful.

    For what it's worth I think your firmware is outdated, but I don't know how to change it or have any files to share. I just know it's different from mine.



  3. #3
    Member
    Join Date
    Nov 2012
    Location
    Canada
    Posts
    145
    Downloads
    0
    Uploads
    0

    Default Re: How can I upgrade my firmware in my General CNC I-carver machine?

    i had to go to the first program 1.4 or something like that on my General.



  4. #4
    Member cosmo52's Avatar
    Join Date
    Nov 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: How can I upgrade my firmware in my General CNC I-carver machine?

    I will follow this thread as I have the same issues
    Nick



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How can I upgrade my firmware in my General CNC I-carver machine?

How can I upgrade my firmware in my General CNC I-carver machine?