- New Machine Build- CNC 5 Axis Router Post Processor
-
Member
CNC 5 Axis Router Post Processor
We purchased a new PDJ Inc 5 Axis Router Machine which runs on a Mach 3 Controller. We are not sure if the Post Processor is to be programmed from the Tip of Tool or Center of Rotation of the head. We tried to reach out to the router seller and he isn't sure either. Is Mach 3 capable of supporting 5 Axis Machining from tool tip? Kindly advise.
Similar Threads:
-
-
Member
Re: CNC 5 Axis Router Post Processor
Mach3 don't have RTCP...
Some post can create something working but without any RTCP capabilities as full controll of TCP speed, displacement of working piece in different position thant post-processed position, etc.
-
Member
Re: CNC 5 Axis Router Post Processor
Hi Shineworld,
Thank you for your response. Since I am new to CNC Routering just wanted to confirm if RTCP meant Machining from Tool Tip?
Thank you.
- New Machine Build- CNC 5 Axis Router Post Processor
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules