New Machine Build Introducing the BobsCNC KL733 (36" x 36") and the KL744(48" x 48")


Results 1 to 2 of 2

Thread: Introducing the BobsCNC KL733 (36" x 36") and the KL744(48" x 48")

  1. #1
    Member rlwoodjr's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    168
    Downloads
    0
    Uploads
    0

    Default Introducing the BobsCNC KL733 (36" x 36") and the KL744(48" x 48")

    I have been working on this design for over 2 years. I have always liked the Bell-Everman servo drive. It is a clever design. The ball screw on the Z makes for smooth operation. I have listed the specs below for both models.




    If you have any questions let us know.

    Bob
    BobsCNC.com

    Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")-shop-jpg







    Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")-kl7specs-png

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")-shop-jpg   Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")-kl7specs-png  


  2. #2
    Member rlwoodjr's Avatar
    Join Date
    May 2006
    Location
    USA
    Posts
    168
    Downloads
    0
    Uploads
    0

    Default Re: Introducing the BobsCNC KL733 (36" x 36") and the KL744(48" x 48")

    These are our KL755. We do not have these available for production, but we use them to make the KL744 and KL733





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")

Introducing the BobsCNC KL733 (36" x 36") and the  KL744(48" x 48")