i've retrofitted an isel with stepper motors with no problem. just find out what kind of motors are used and google them if they are not the classic four wire stepper motors. if they are servos its also possible.
michael
Hey Guys
I have an old Isel cnc router, bed size 1500mm x 1300mm. It has
been a gem for 20 years but now the controller has given up the ghost
and left me pretty much in the crap.
I have read through many posts and seen that I am not alone albeit
that the relative posts were many years ago and addressing the problem
could have many new solutions.
So what I need to know is this:
Can I use my existing motors? which are (attached pics down the line)
What would be the best drivers to run these? (Gecko G540 recommended before on this forum)
Am I able to run Mach 3 from Autocad Dwg files?
We are also running another cnc router using an Isel controller
with a DOS based interface on a Windows 98 OS.(waiting for that to give up)
Isel have told us that acquiring a new controller is impossible
and the whole system needs to be upgraded, I get that, time to move on
but not at a cost of 70.000 South African Rands.
Is there anyone that can help with this issue?
Attached I will place a few pics of what I have.
Similar Threads:
- Build Thread- grbl-Upgrade for Techno Isel Davinci/ISEL EP1090
- Newbie- Techno-Isel DaVinci Update/Retrofit
- Need Help!- Wanted - manual for ISEL PC CV-3 servocontroller/ ISEL GFV flatbed
- Techno / Isel / Tecno Isel confusion
- Newbie- Sieg X1 retrofit with Linux EMC2, CNC Fusion retrofit kit and Gecko G540
i've retrofitted an isel with stepper motors with no problem. just find out what kind of motors are used and google them if they are not the classic four wire stepper motors. if they are servos its also possible.
michael