You need to set the port and pin numbers for M3.
please see attached photo of the screen in the UCCNC software. I have no idea what i'm looking at but the spindle is not spinning at all. I ran a job and it ran the full job path correctly without the spindle turning at all (i ran it in the air). the X,Y and Z all worked perfectly on this new 6040 (my first ever CNC)
thanks so much for your help with the spindle.
Eddie
Similar Threads:
You need to set the port and pin numbers for M3.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)