- Need Help!- New drive for my old Gerber Sabre 408
-
Registered
New drive for my old Gerber Sabre 408
Hi guys!
My old Gerber Sabre 408 needs a new spindle driver.
Colombo 10 Hp with ATC.
Signal from the duart card seems Ok (Nice looking 5V)
When I try to do the warm upp command
I get "I/O error" on the display pad.
I Can run the spindle from the driver
My guess is some kind of com problem on the analog input?
Original Drive is IDM Controls inc P5 Series 18 years old!
Can a Mittsubishi A800 communicate with my Gerber?
Any Ideas on a better/ cheaper Drive?
I have fairly god discount at Ahlsell.
https://www.ahlsell.se/10/el-1/autom...tSearchPhrase=
Similar Threads:
Last edited by STYF; 10-04-2018 at 03:33 PM.
-
- Need Help!- New drive for my old Gerber Sabre 408
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules