- AXYZ 4008 ATC
-
Registered
AXYZ 4008 ATC
I just started working with a AXYZ 4008 ATC machine. It has been at the company for a number of years. The most common issue that I have run across is while a program is running it will attempt to do a tool change where a tool change is not called for. The error pops up on the smart console. Any help on how to fix this would be appreciated.
Thanks
Similar Threads:
-
-
Member
Re: AXYZ 4008 ATC
Hey mate
do a function 1 on the machine and tell us what a2mc operating os it is running. Sometimes what happens if something metal goes onto the tool change sensor on the gantry it will try and do a tool change and error out. Get a phot of the error on the smart console and I might be able to help you. I was a multicam/axyz technician here in australia.
Cheers Ryan
- AXYZ 4008 ATC
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules