AXYZ 4008 ATC


Results 1 to 2 of 2

Thread: AXYZ 4008 ATC

  1. #1
    Registered egallegos's Avatar
    Join Date
    Jul 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default AXYZ 4008 ATC

    I just started working with a AXYZ 4008 ATC machine. It has been at the company for a number of years. The most common issue that I have run across is while a program is running it will attempt to do a tool change where a tool change is not called for. The error pops up on the smart console. Any help on how to fix this would be appreciated.

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2015
    Location
    Australia
    Posts
    60
    Downloads
    2
    Uploads
    0

    Default Re: AXYZ 4008 ATC

    Hey mate

    do a function 1 on the machine and tell us what a2mc operating os it is running. Sometimes what happens if something metal goes onto the tool change sensor on the gantry it will try and do a tool change and error out. Get a phot of the error on the smart console and I might be able to help you. I was a multicam/axyz technician here in australia.

    Cheers Ryan



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AXYZ 4008 ATC

AXYZ 4008 ATC