Hi,
I have High Z 1000T CNC with Kress router. It died few months later and company is closed now so no repairs. I decided I want something better then Kress anyways and I'm looking at Chinese spindles 1.5kw or 2.2kw. I'm using cnc only for wood, speed is not so important as cut quality. My concern is weight, Kress is not heavy but even with that I have 1mm bend / sagging in middle of table just from weight of z;y-axis and router. Does anyone have any experience or advice in my situation what would you choose. Also should I buy water cooled or air cooled. Is there any big difference in 220v vs 380v. Thank you a lot.

My CNC - https://www.cnc-step.com/cnc-router-...00t-ballscrew/

Similar Threads: