- Tornado 100 Random Turret Movements
-
Member
Tornado 100 Random Turret Movements
Hi All
I was hoping someone could give me some guidance with a turret issue on my tornado 100. If I program a toolnumber in MDI the turret moves to a different tool number then another and jumps back and forth to those tools never stopping. If press the turret index button the turret moves one station exactly as it should. I have looked in the ladder and checked bits x0.0 to x0.3 and the numbers are correct according to the duplomatic manual when in each tool position so I am at a bit of a loss on what to try next. Any help would be much appreciated.
Thanks
Similar Threads:
-
- Tornado 100 Random Turret Movements
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules