I put something in a thread 5 years ago
... search for a thread titled "colchester 2000L"
i accidentally changed batteries with the machine off and have lost all parameters and diagnostics on our lathe.
Could anyone please help me with this as its our only lathe and need to get it running...
Its a Colchester 2000L
Mch No : L2150GFBSA/01680
It has an 8 station Duplomatic tool turret.
Please any help with this would be greatly appreciated.
Brent
Similar Threads:
- Need Help!- Colchester 2000L
- Need Help!- Colchester 2000L CNC
- colchester cnc 2000l parameter
- Need Help!- Colchester 2000L APC 310 and 320 Alarm
- Need Help!- Need Parameters For Colchester 2000L CNC
I put something in a thread 5 years ago
... search for a thread titled "colchester 2000L"
Thank you , i did enter it all. were a few changes i had to make but so far so good, only problem now is my Tool station doesnt stop rotating if i try to index it.
Would you know the correct diagnostic code for an 8 station duplomatic tool turret?
Machine is long gone now... one of the guys was shifting it's location by crane, but slung it badly & dropped it. Broke a couple of items, oil pump & I think one of the boards in the cabinet.
I'd bypass the turret by setting D500 to all zeros, get everything else checked
Your turret problem could be one of the positioning switches for the turret. Or some procedure to set the turret "home" position ( just thinking out loud here)
Other than that, can't help further, good luck
Brent messaged you its nothing to do with parameters I work on thise all the time
Hello, can you send me a message and I will help you install parameters?
salihakhan@turkuazmarine.com
Merhaba e-posta adresinizi verebilir misiniz? a90 parametresine ihtiyac?m var.salihakhan@turkuazmarine.com
- - - Updated - - -
Merhaba e-posta adresinizi verebilir misiniz? a90 parametresine ihtiyac?m var.salihakhan@turkuazmarine.com
- - - Updated - - -
Merhaba e-posta adresinizi verebilir misiniz? a90 parametresine ihtiyac?m var.salihakhan@turkuazmarine.com