- Need Help!- Colchester CNC 350 w/ FANUC 0T - Lost parameters!
-
Member
Colchester CNC 350 w/ FANUC 0T - Lost parameters!
Hi
We have here a quite old (from about 1993) Colchester CNC 350 with FANUC 0T & DUPLOMATIC 12 turret, that has lost its parameters due to low batteries (yes I know... owner should have change them long time ago, but didn't do so). I have the machine manual but... it doesn't have the parameter sheets inside it! So, I need to find someone that might have a 350 and he's willing to send me the parameters of it, to work them out as a starting point at least.
Anyone that can help me?
Thanks in advance
Sotiris
Similar Threads:
-
-
Member
Re: Colchester CNC 350 w/ FANUC 0T - Lost parameters!
I have private messaged you
-
Member
Re: Colchester CNC 350 w/ FANUC 0T - Lost parameters!
Hi
Thank you, I have just replied to it.
Best regards
Sotiris
- Need Help!- Colchester CNC 350 w/ FANUC 0T - Lost parameters!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules