Problem "New" A50 faults


Results 1 to 4 of 4

Thread: "New" A50 faults

  1. #1
    Member
    Join Date
    Mar 2013
    Location
    UK
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default "New" A50 faults

    I have just acquired an A50 which on power up displays the following fault codes : 1031, 1001, 701. Can anyone point me in the right direction ?

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: "New" A50 faults

    Hi Clive

    Are you sure its an A50 ?????????

    1001 Spindle Monitor Off When Commanded
    This indicates that there is a voltage on the spindle motor when the CNC is not
    commanding any spindle movement.

    1031 Spindle Motor Fan Overload

    701 Fan overheat The fan on top of the cabinet for the control unit is overheated



  3. #3
    Member
    Join Date
    Mar 2013
    Location
    UK
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: "New" A50 faults

    Hi Darren,

    It is in fact a Tornado 80. (misled by seller !)

    I have looked at the Spindle amplifier module. The fan is going round but looks pretty dirty so will take it out and clean it. Same with the fan on the spindle motor.



  4. #4
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: "New" A50 faults

    Clive
    Manuals are ready I did email you please call me



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

"New" A50 faults

"New" A50 faults