Problem Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe


Results 1 to 2 of 2

Thread: Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe

  1. #1
    Registered
    Join Date
    Aug 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe

    On Start up of the machine the turret just continues to rotate....no lock in position activated ?

    Any advice please

    Similar Threads:


  2. #2
    Activation process ktik's Avatar
    Join Date
    Aug 2018
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    Hi.

    I see that you have a Colchester Tornado 200 and I need your help.

    It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?

    Thank you very much



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe

Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe