Originally Posted by
Cshade30
Hey guys,
I have a program here that I am working on to throw some holes in parts that is returning to home after each canned cycle; I have eliminated this problem by removing my G28 (Return Home Command) which is commonly followed by X,Y,Z coordinates. After doing this I thought, well I do want a retract just not a return to home position, so I had added a Z value just after my canned cycle ends it looks something like this :
" N7 G90 G54 G00 X-4.625 Y-.375N8 G43 Z.5 H01 M08
N9 G81 G98 R.5 Z-.6875 F2.5
N10 Y-2.125
N11 X-.375
N12 Y-.375
N13 G80 Z1
N14 ( Center Drill1 )
N15 X-2. Y-1.25
N16 G81 G98 R.5 Z-.425 F2.5
N17 X-1.
N18 G80 Z1.0"