Need Help! Inverse kinematic / 4+5 axis

Results 1 to 3 of 3

Thread: Inverse kinematic / 4+5 axis

  1. #1
    Registered
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    181
    Downloads
    0
    Uploads
    0

    Default Inverse kinematic / 4+5 axis

    Is anyone else interested in coding inverse kinematic and collision testing for post processing G-code to make proper use of a 4th and 5th axis?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2008
    Location
    Turkey
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Inverse kinematic / 4+5 axis

    Which CAM system you are using?



  3. #3
    Registered
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    181
    Downloads
    0
    Uploads
    0

    Default Re: Inverse kinematic / 4+5 axis

    " interested in coding "
    => writing my own CAM.
    Also very slowly writing code to integrate this into the CAM module for FreeCAD.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Inverse kinematic / 4+5 axis

Inverse kinematic / 4+5 axis