- Older C11G Breakout Board Compatable with VFD
-
Member
Older C11G Breakout Board Compatable with VFD
I have an older board in our router.
The board has no revision numbers on it so I assume it is one of the first. No problems.
Can I use the board with your 3 HP VFD (sku: VFD22) ?
Also on your site you have a series of sample wiring diagrams to choose from.
Anyone in particular to choose ?
Thank you
JohnD
Similar Threads:
-
-
Member
Re: Older C11G Breakout Board Compatable with VFD
Here is what I remember:
- It works with a step pin and a 25khz frequency on pin 8 will give you full speed. Not PWM like on current models.
- I think the relays are controlled by pin 1 and 9.
- You can use the information on the C6 board to configure the spindle, but using the correct pins.
Arturo Duncan
https://cnc4pc.com
- Older C11G Breakout Board Compatable with VFD
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules