Older C11G Breakout Board Compatable with VFD

Results 1 to 2 of 2

Thread: Older C11G Breakout Board Compatable with VFD

  1. #1
    Member
    Join Date
    Feb 2005
    Location
    USA
    Posts
    116
    Downloads
    3
    Uploads
    0

    Default Older C11G Breakout Board Compatable with VFD

    I have an older board in our router.
    The board has no revision numbers on it so I assume it is one of the first. No problems.
    Can I use the board with your 3 HP VFD (sku: VFD22) ?
    Also on your site you have a series of sample wiring diagrams to choose from.
    Anyone in particular to choose ?

    Thank you

    JohnD

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: Older C11G Breakout Board Compatable with VFD

    Here is what I remember:
    - It works with a step pin and a 25khz frequency on pin 8 will give you full speed. Not PWM like on current models.
    - I think the relays are controlled by pin 1 and 9.
    - You can use the information on the C6 board to configure the spindle, but using the correct pins.

    Arturo Duncan
    https://cnc4pc.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Older C11G  Breakout Board Compatable with VFD

Older C11G  Breakout Board Compatable with VFD