- Need Help!- connecting C10 to C76-UC300EHT
-
connecting C10 to C76-UC300EHT
Hey everybody
I am new in CNC machine and I am doing this for my project in university. there is an old CNC machine in the lab that works with C10 motion controller and uses mach3 on windows 7. Now I want to upgrade it and use windows 10. In this regard I bought a C76-UC300EHT board which is connected to the computer via Ethernet cable. Instead of connecting all motors to this new board I just connected the C10 to C76-UC300 by a LPH 26 Pin ribbon cable and then provided power supply for the new board and connected it to the computer (I got this Idea from here "http://www.themakersguide.com/motion-control"). After some attempts, mach3 now recognizes the board and the LED on the C76-UC300 is green.
The problems is, by mach3 I move the axis but in real noting happens.
Can you help me about this issue?
Thank you so much
Behzad
Similar Threads:
-
- Need Help!- connecting C10 to C76-UC300EHT
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules