Mini Dell Computer , Lost the Mach 3 license

[johnd]

I purchased a mini Dell computer and monitor from CNC4pc. several years ago. We had some problems with
unit losing the software and sent it back for repair.
Never used it until now as we had a spare unit so wound up shelving it as a backup.
Went use the computer and found that Mach3 had been loaded on the machine and will only
run in demo mode. Is the license on the unit ?
Do I have to buy another license ?

Thank you

Similar Threads:

• Dell Optiplex 745 & Bobcad V24 Mill & Mach3 Full License $550 shipped
• Dell Optiplex 755 & Bobcad V21 CAD/CAM & Training Videos & Mach3 Full License $425
• Dell Vostro 200 CNC Controller (Full Mach3 License) $205 BIN
• Dell Vostro 200 CNC Controller (Mach3 Full License & New Gecko G540 REV 8) $1.00

[arturod]

In Mach3 the license is not associated to the PC, but the installation. You just need to copy the license back into the Mach3 root directory. If you do not have the license, open a ticket in the cnc4pc and it will be sent to you again.

Arturo Duncan
https://cnc4pc.com

[johnd]

Thank you for your response Arturo.