C11G axis

[johnd]

Could someone tell me the number of axis that can be controlled through the C11G break out board ?
thank you.

Similar Threads:

• NM-145 and C11G BOB Questions
• Need Help!- WTF C11G Gecko 203V
• CNC4PC C11G BOARD
• c11g vfd direction control
• Relé interfase C11G

[arturod]

It is intended for 4 axes. You could use up to 6, but then you will have to use pins that are intended for a different use. Like the Safety Charge Pump, Spindle Control, or Relays.

If you need more than 4 axes, there are other more appropriate boards.

If you open a ticket on our website and tell us about your project, we will send you recommendations:

https://cnc4pc.com/contact/

Arturo Duncan
https://cnc4pc.com