I think all of the DMM pricing on CNC4PC's website is very wrong. The pricing direct from DMM has not changed.
I've been getting ready to pull the trigger on a DMM DYN4 Servo Kit 1300W to use as spindle motor and I just went back to the CNC4PC site and the prices have quadrupled to $2485.00 for one servo and controller. And still another $284 to $860 for the cable. I guess I better stop drawing a motor mounts in Fusion 360 and start shopping eBay for a new solution. Bummer, I thought that was going to be a great solution.
John
Similar Threads:
I think all of the DMM pricing on CNC4PC's website is very wrong. The pricing direct from DMM has not changed.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I hope that is the case. I'm not really liking what I am finding on eBay. Prices are not bad but the technical info is lacking.
John
I am sorry, it was an small glitch in our website. I just fixed it:
https://cnc4pc.com/dmm-dyn4-servo-kit-1300w.html
Arturo Duncan
Welcome to CNC4PC
Arturo,
the pricing is wrong for all of the DMM products on your website. They are all about 4x what they are supposed to be.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Yes, exactly, the prices in the grid appear as 4x. But it is a cache issue. The prices are ok. If you hit on the product, or try to place an order, the price is fixed. I tried to refresh the cache in the website and browser and the problem continues. I saw this happening once before and it fixed itself later. For now I tried all the tricks I know and could not get it to work. I will check again this afternoon.
Arturo Duncan
Welcome to CNC4PC
Arturo, I placed my order tonight. I went for the 1800w. When I went over to PayPal the price just over $3100 so I went back to your site to see what was going on and I found that there were 4 in my cart. I changed it to one and finished my order.
John