- Need help CNC4PC Non-Contact Height Sensor for Plasma
-
Registered
Need help CNC4PC Non-Contact Height Sensor for Plasma
Need help wiring CNC4PC Non-Contact Height Sensor for Plasma wiring to Hypertherm Powermax 45 XP through Mach 3
Using CNC4PC C23 - Dual Port Multifunction CNC Board with smooth stepper.
Any Wiring diagrams would be awesome.
Thanks
Similar Threads:
-
-
Member
Re: Need help CNC4PC Non-Contact Height Sensor for Plasma
Please check for the wiring diagram and instructions link for the product under the product page in our website:
https://cnc4pc.com/non-contact-heigh...el-cutter.html
The sensor signals go to available input pins in the C23 and one of the relay on the C23 can be used to fire the torch.
If you need further assistance, you are welcome to open a support ticket in our website.
Arturo Duncan
http://cnc4pc.com
- Need help CNC4PC Non-Contact Height Sensor for Plasma
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules