Cnc4pc c62 Board help please

Results 1 to 5 of 5

Thread: Cnc4pc c62 Board help please

  1. #1
    Member
    Join Date
    Dec 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Cnc4pc c62 Board help please

    Hello

    I use c62 board and I am very happy with that.

    my question is

    all my inputs set to be activate with 24 volt .
    all jumpers set for that and when I connect the
    input to 24 volt green led in mach turn on.

    my problem is that

    I got a tool setter sensor and it works with 5 volt.
    I can use the output of c62 for 5 volt.

    The sensor will activate when it sink to common I guess it has to connect to
    zero volt.
    how I have to change the input 5 port 1 only to
    work with that. I want all other inputs still activate with
    +24 volt.

    which jumpers I have to change ?

    how can I do that ?

    please Help.

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: Cnc4pc c62 Board help please

    Still waiting .

    Any help please ?



  3. #3
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    244
    Downloads
    0
    Uploads
    0

    Default Re: Cnc4pc c62 Board help please

    Yes, all I/Os have jumpers to select the operating voltage for each pin. This is the same for inputs or outputs.

    Let me know if it is clear.

    Arturo Duncan
    http://cnc4pc.com



  4. #4
    Member coherent's Avatar
    Join Date
    Apr 2003
    Location
    Arizona, USA
    Posts
    525
    Downloads
    2
    Uploads
    0

    Default Re: Cnc4pc c62 Board help please

    Original message removed. Sorry for jumping in with incorrect advice Arturod, I didn't realize each input pin had it's own jumper! Makes it simple, like you said he just needs to set the jumper for the sensor input pin to 5v.

    Last edited by coherent; 01-29-2018 at 11:51 AM.


  5. #5
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    244
    Downloads
    0
    Uploads
    0

    Default Re: Cnc4pc c62 Board help please

    Yes, you can. You do have a jumper to set the common to be used for each group of I/Os, and there are independent jumpers for each pin to select if that pin would use +5vdc or +12/24vdc logic. I know the way we set it up may be a little unconventional, but it allows wiring I/Os without having to use external pull-up/down or in-line resistors. So you can wire common industrial sensors, relays or other devices using TTL signals.

    Arturo Duncan
    http://cnc4pc.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cnc4pc c62 Board help please

Cnc4pc c62 Board help please

Cnc4pc c62 Board help please