Nice Work! Looks really good.
Hi All
Wanting to share my 1st router build and get some feedback if I'm going wrong with anything. Still a work in progress but will update as i progress. Hoping to achieve light aluminum machining.
Nema 34 motors
Hiwin 16mm ballscrews ( 16x10 on X/Y, 16x5 on the Z)
Hiwin 15mm Guides all round
Ethernet Smooth stepper control (Mach 4),
2.2kw Water cooled spindle (ATC Spindle in the near future)
Schneider atv320 2.2kW variable speed drive.
SICK inductive limit switches on all axis,
Leadshine Em882S stepper drivers ,
1kw 62V SMPS X&Z drives
1kw 72V Unregulated supply for Y Drives (on the Way)
X/Z Gantry being redesigned and made at the moment.
Cheers
Scott
Similar Threads:
Last edited by ScottDrake; 08-29-2021 at 01:05 AM.
Nice Work! Looks really good.
Jim Dawson
Sandy, Oregon, USA
I like the steel web on the face of the gantry.