New Machine Build My second build,, all in steel from Cuba


Results 1 to 5 of 5

Thread: My second build,, all in steel from Cuba

  1. #1
    Registered
    Join Date
    Feb 2007
    Location
    CUBA
    Posts
    178
    Downloads
    0
    Uploads
    0

    Default My second build,, all in steel from Cuba

    Hi everyone!!

    Here you have a picture of my second build, all in steel
    cutting size 4' x 4' x 4 inches.
    Main use will be plastics and wood.

    My first buld was a JGRO 11 years ago. Its still working after some
    repair work.(end of the picture)


    Summary of the parts.

    Table legs in 3 inches Steel angle, all weld
    Table estructure in 1" x 2" x 2mm
    X and Y Axis support in 2" x 2" square tube filled with hard wood in all places where
    are bolts.
    Rails in 3/4" steel angle
    V Wheels and bushings cuban made,2 6000type bearingsin each vwheel.
    1/2" 10 ACME 5Starts for X and Y axis from Mc Master
    1/2" 8 ACME 2 sTART for Z Axis from Mc Master
    Standard Anti-backlash Kit from Dumpster CNC
    1/2" Pressed Steel Two Bolt Flange Bearing

    CNC Controler, power source and steppers from AutomationTechnologies
    4 axis, KL4030 STEPPER DRIVERS
    4 KL23 STEPPER MOTORS
    I know that here are some problems about inductancy, later I will
    ask about help for this part.


    Now Iam working in squaring the axis and leveling.
    Next step electricity


    Please give a look
    Opinions are well received.

    The most important part were imported from USA.

    I want to thanks for every one in this forum
    that share his desings and knowledge for free.


    Sorry my bad english, is not my native idiom.



    Thanks in advance
    Rene

    My second build,, all in steel from Cuba-img_3917-jpgMy second build,, all in steel from Cuba-img_3917-jpgMy second build,, all in steel from Cuba-2-jpg

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2005
    Location
    USA
    Posts
    892
    Downloads
    0
    Uploads
    0

    Default Re: My second build,, all in steel from Cuba

    Very nice looking.

    Retired Master Electrician, HVAC/R Commercial union shop and Lots of hobbies. FLA Saturn 2 4x4 CNC Router


  3. #3
    Registered
    Join Date
    Feb 2007
    Location
    CUBA
    Posts
    178
    Downloads
    0
    Uploads
    0

    Default Re: My second build,, all in steel from Cuba

    Thanks, its a work in proccess,, still a lot to learn...



  4. #4
    Registered
    Join Date
    Feb 2007
    Location
    CUBA
    Posts
    178
    Downloads
    0
    Uploads
    0

    Default Re: My second build,, all in steel from Cuba

    MORE PICS OF BUILD


    My second build,, all in steel from Cuba-antibackslash-mount-jpgMy second build,, all in steel from Cuba-base-jpgMy second build,, all in steel from Cuba-flange-bearings-jpgMy second build,, all in steel from Cuba-guide-calibration-jpgMy second build,, all in steel from Cuba-modular-axis-jpgMy second build,, all in steel from Cuba-rails-aligment-jpgMy second build,, all in steel from Cuba-stepper-mount-jpgMy second build,, all in steel from Cuba-tube-reinforcement-hard-wood-jpg



  5. #5
    Registered
    Join Date
    Dec 2014
    Posts
    599
    Downloads
    0
    Uploads
    0

    Default Re: My second build,, all in steel from Cuba

    Nice looking machine!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

My second build,, all in steel from Cuba

My second build,, all in steel from Cuba