Tornos Enc-264 programing help

[EvansMachine]

Hello,
I am having a hard time getting my tornos to run. In the sample programs in the manual there are two sub routine's that i am unsure what they do they are or of I have to have them in my program.
G160 H9810
G160 H9910
They seem to be in every sample progarm for channel 1. I am new to cnc let alone swiss. I also have some alarms that pop up. They are
-2035 p/s clamping oil ( I filled it and the alarm went away for a little bit but came back, do I just need to fill it again?)
-008 p/s this one is not in my manual so I don't what this is.
-945 This says it is a servo alarm, But when I check the read outs on them the are dashes as the sould be.
Please help me as I bought this machine to run a job and ended up doing it manually.
Thanks in advance, Colin

Similar Threads:

• Tornos ENC HELP!!
• Tornos TB DecoEvo 10
• Need Help!- Tornos ENC 162
• Need Help!- Programing Tornos ENC 167 , 163

[gregos1983]

Hello! I've got some issues with my ENC-264. The most problematic one, at the begining of the program, when the cutoff tool makes a clear cut, the main head supposed to go back, with open collet (In Z direction). But instead it goes right towards the tools (with open collet), and an error code arise (It's in end position -Z), so i can not produce anything. Does anyone have idea, how to get it back to work?
Header Looks as:
G161 A16.0 B0.03 C0202 F-92.0 h3.0 I0 K1 J1 M40 Q0 R50 S600 T1800
Thanks.

[Vaibhavvekariya]

Hello,
I am having a hard time getting my tornos to run. In the sample programs in the manual there are two sub routine's that i am unsure what they do they are or of I have to have them in my program.
G160 H9810
G160 H9910
They seem to be in every sample progarm for channel 1. I am new to cnc let alone swiss. I also have some alarms that pop up. They are
-2035 p/s clamping oil ( I filled it and the alarm went away for a little bit but came back, do I just need to fill it again?)
-008 p/s this one is not in my manual so I don't what this is.
-945 This says it is a servo alarm, But when I check the read outs on them the are dashes as the sould be.
Please help me as I bought this machine to run a job and ended up doing it manually.
Thanks in advance, Colin

Do you still have enc 264? I have solution for your one problem. 008 and 2035 alarm