Need Help! face milling.



Results 1 to 2 of 2

Thread: face milling.

  1. #1
    Member eliezer32's Avatar
    Join Date
    Oct 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default face milling.

    I'm working on a Tsugami SS327 swiss. I'm milling a flat on my OD and after my G0 positioning move, the machine stops moving. Is there anything Obvious I should look for.
    S3000 G97 G99 M223 P3 T1111
    M223 P3 S3000
    G50 W-[14/25.4]
    M50
    M8
    G0C0
    M82
    G1 G99 X.675 Y.110 Z-.2520 F.010 machine stops on this line

    Similar Threads:


  2. #2
    Member CNCRim's Avatar
    Join Date
    Feb 2006
    Location
    usa
    Posts
    992
    Downloads
    0
    Uploads
    0

    Default Re: face milling.

    G99 to G98 and feedrate too slow maybe
    G98 F8.0

    The best way to learn is trial error.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

face milling.

face milling.