Hello, i have Tsugami BS26CE from 1998 year with Fanuc 0-T...control and i have a problem with corect programming riggid Tapping with cross driven tooling.
I checked all possible combinations G84 and G88 cycle include or without M29 and does not working.
At M29 driven spindle stop, startcycle and stop button flashing and nothing happens.
Without M29 program stop on G84 cycle and nothing happens too.
How is corect program to do it?
Tapping function is available on this Machine because i have a book with drawing from previous owner and he do it different details with cross tap. Unfortunately i dont have a contact to him and i do not have how to find out.
In manual there is no example how to riggid cross Tapping.

Similar Threads: