please, how to check alignment for small tool ... - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 20 of 20

Thread: please, how to check alignment for small tool ...

  1. #13
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2720
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    hy thunder, please, i have seen that you have an extra-sense when it comes to alignments; please, can you help me with this one ?

    https://www.cnczone.com/forums/gener...lign-long.html

    kindly

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


  2. #14
    Member
    Join Date
    Mar 2009
    Location
    us
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    I'll bet it's pricey, but well worth the money if you constantly deal with small tooling...

    https://www.genswiss.com/perfect-zero.htm

    Youtube video of system here...





  3. #15
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2720
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    nice tool / thx

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


  4. #16
    Member
    Join Date
    Jan 2013
    Location
    USA
    Posts
    102
    Downloads
    2
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    What you want to get is the picco ace holder I have linked here It requires a quarter turn to seat or realease the insert.

    Alo in my opinion the Genswiss is not accurate enough. It is an interesting idea, but must not accurate enough to justify the purchase.



  5. #17
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2720
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    hy jreynolds that thing from iscar is good 2 clamp the tool, but is not assuring coaxiality; only a sleeve and a cnc do not assure coaxiality, but a measuring & adjustment method

    Also in my opinion the Genswiss is not accurate enough
    somehow i also feel that; even if there is low tir when the device is clamped inside the guide bush ( and guide bushes are wear parts, etc ), also the camera has to be concentric with the od of the part, and i don't know how is possible to check that

    however, i was wondering if there is a variant to home-build such gadget i am not up2date with latest stuff, but i believe that a small camera concentric with the housing + wireless transmission, is not hard to find these days / kindly

    Last edited by deadlykitten; 05-29-2019 at 01:01 AM.
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


  6. #18
    Member
    Join Date
    Jan 2013
    Location
    USA
    Posts
    102
    Downloads
    2
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    you could always blue the end of your stock and bring up the tool and scribe it with the tool then remove the stock and look at it. I have never really founf that the be a big issu.



  7. #19
    Member
    Join Date
    Mar 2009
    Location
    us
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    Quote Originally Posted by jreynolds5 View Post
    What you want to get is the picco ace holder I have linked here It requires a quarter turn to seat or realease the insert.

    Alo in my opinion the Genswiss is not accurate enough. It is an interesting idea, but must not accurate enough to justify the purchase.
    What are you talking about? The Genswiss system can center the tool within TENTHS RELIABLY. You say it's not accurate enough, yet go on giving advice of blueing the end of the bar and scribe a line? LOL



  8. #20
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2720
    Downloads
    0
    Uploads
    0

    Default Re: please, how to check alignment for small tool ...

    What are you talking about? The Genswiss system can center the tool within TENTHS RELIABLY
    hi 369, to eliminate doubts, it is required to check :
    ... the alignment of the genswiss system; the camera center is coaxial with the housing ? they are never coaxial, so is needed to measure the excentricity, so to determine the precission class
    ... the resolution; that's easy

    TENTHS RELIABLY
    2.33 tens, or 0.7tens ?

    1.1 or 0.15 tens ?

    also, what does those numbers represent ? and how to check these numbers ?

    You say it's not accurate enough, yet go on giving advice of blueing the end of the bar and scribe a line?
    is not only about scribing the line, but also inspecting the scribbed line position with instruments with precision <0.01, like microscopes, etc

    this method takes longer than using the genswiss, but is possible to determine their precision pretty accurate

    a microscope acurracy&alignment can be checked, so it can be trusted, but it requires time to use it; to shorten that time, is easier to put the microscope/camera inside the cnc, but this 'alternative' also needs to be checked for accuracy & alignment ... at this moment i don't know how is that possible, so to make the device trustfull / kindly

    Last edited by deadlykitten; 06-19-2019 at 10:52 AM.
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

please, how to check alignment for small tool ...

please, how to check alignment for small tool ...