No pic.
Pinions wear out, and need to be replaced periodically.
Hi all,
Got a problem with my 5x10 CNCRP Pro. Was running a 3D parallel cut and noticed the x axis slipped about 5mm - by the time I noticed it was too late and the X axis rack and pinion was worn - had noticeable metal dust along the axis edge - the pinion had a definite wear line of 1mm. Attached some picture - anyone have any idea how this could happen? Lose set screws?
Thanks
S
No pic.
Pinions wear out, and need to be replaced periodically.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)