Either wiring issues, or incorrect port and pin numbers.
Hello,
I am running a CNCRouterParts 4'x4' machine with a Leadshine MX4660 stepper driver, Ethernet SmoothStepper, and Mach3. When Mach3 is connected to the machine, the loading bar appears on Mach3 and the "pump" LED illuminates on the stepper driver. Additionally, all motors are energized and cannot be moved by hand. However, when the machine is jogged in Mach3, the DRO numbers change, but the motors do not move. Requests to start the spindle similarly do nothing. I also noticed that both the green and red LED's on two of the axes on the stepper driver fail to illuminate.
Any ideas?
Thanks
Similar Threads:
Either wiring issues, or incorrect port and pin numbers.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)