Originally Posted by
bwiab
Hello... just finished my assembly and I have the machine moving but can't seem to figure out homing... In mach 4 is "ref all home" replaced by "Home XYZ Axes"? my machine stops on the X but the bumper is engaged and being pushed on... is that correct or should the bumper (ideally) not be contacted? It's set up so the Z homes first and then the x and y together. Z stops perfect about 1/4" from sensor. X is how I mentioned above. When it gets to the Y, click click click and appears as if one motor keeps running...I hit stop and gantry is not square... Is that just a sensor adjustment as mentioned above? Thanks!