Electronics Parts List HELP

[SceroGuitars]

Hey Guys,

I just placed my order for my 2'x4' Standard Machine, and am building/ordering my parts list while my order ships.

I understand "most" of what I need and how to wire it, but there's a part i'm still confused by. Here's my parts list so far:

4 x Gecko G201X Drivers
4 x Nema 34 640OZ 5.5Amp Motors
MeanWell 48V 50amp Power Supply
Warp9 Ethernet SmoothStepper

Where I'm confused is, what connection/BOB do I need to use to connect the four G201X drivers to the Warp9 ESS? I thought I heard someone say somthing about a DB25 Board/Connection, but that was more so when I was considering the G540...

Any help would be GREATLY appreciated!

Similar Threads:

• want list of required electronics
• Need Help!- Electronics shopping list?
• Need Help!- Parts List
• Arboga G2508 Parts, Parts List, Manual
• The ultimate list of tools for electronics

[Jim Dawson]

Something like this would be my choice https://www.amazon.com/Sysly-Breakou...ustrial&sr=1-4

Then get a ribbon cable to connect the ESS to the breakout board. https://www.amazon.com/Uxcell-Ribbon.../dp/B01BI00AUA

[nlancaster]

Scero, you still need some sort of breakout board for all your limits and steppers.

SO you could use some inexpensive boards with the ESS or for a bit more but super easy and cofigurable PMDX-126 and PMDX-134, I have both boards in my machine.

[ger21]

MB3 from CNC Room is an awesome board for the ESS.

[3dpraxisstudio]

This is my choice I send you so you can see.

https://www.amazon.com/IDC26-Header-...erminal+Block+ Connector + with + Simple + DIN + Rail + Mounting + feet & qid = 1574764447 & sr = 8-2-fkmr0