The third project was a spoilboard with 20mm holes to fit dogs from the MFT.
Sent from my iPhone using Tapatalk
The first project i made was the dust shoe from the Avid website. And a good thing that was because just cutting those two pieces made an enormous amount of of debris - like grains of rice.
Once the dust shoe was installed I made a bracket of mg own design to hold the 4” hose to the gantry.
Sent from my iPhone using Tapatalk
Avid CNCPro4824, Warp ESS, Nema 23 steppers, Delta VFD, 2.2kW spindle
Hypertherm Powermax 45XP with TMC3in1 THC
The third project was a spoilboard with 20mm holes to fit dogs from the MFT.
Sent from my iPhone using Tapatalk
Avid CNCPro4824, Warp ESS, Nema 23 steppers, Delta VFD, 2.2kW spindle
Hypertherm Powermax 45XP with TMC3in1 THC