If anyone can give me some ideas on this please help me. I am running mach 3 on my cncrp pro with an ATC. When I give the m6 command to change tools the tool offset is not applied to the tool. Even though it says that a certain tool is loaded and the offset is shown, it doesnt apply it. I can change tool # in the tool information screen of the program run tab to any other tool and then back to tool that is loaded and it will apply it correctly. Only thing I can think of is to reinstall the program, whats driving me crazy is its worked just fine for the last few weeks. I could give the m6 command, the tool would change, and the offset was applied. But now the offset will not apply even though it says in the tool information that the tool is now loaded.

Similar Threads: