Drag Chain Cable Management


Results 1 to 9 of 9

Thread: Drag Chain Cable Management

  1. #1
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Drag Chain Cable Management

    I built my 60120 using the supplied 75x25mm & 50x25mm drag chains. I have a total of 12 cables running in my main drag chain (4 x 6mm encoder cables, 4 x 10mm servo power cables, 3 x 6mm proximity sensor cables z, x+, x-, 1 x 15mm VFD flex cable).
    It's pretty crowded in there !

    Looking at the more expensive and industrial drag chain solutions ( I got quoted US$600 for a 150x30mm chain!) you can have 2 layers of cabling, segment the wiring so it doesn't tangle up and cross over.

    Wondering if 3D printing the following inserts, or cutting them out of a foam material is an effective way to avoid problems of cable wear, binding cables etc ?


    Drag Chain Cable Management-75x25mm-chain-insert-v9-jpg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Drag Chain Cable Management-insert-png   Drag Chain Cable Management-75x25mm-chain-insert-v9-jpg  


  2. #2
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management




    Sent from my iPhone using Tapatalk



  3. #3
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management




    Sent from my iPhone using Tapatalk



  4. #4
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    33088
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management

    One more reason to get a 3D printer.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Registered
    Join Date
    Jan 2015
    Posts
    173
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management

    Love it. Had no clue where that thing was going and thought, how does he connect them to make a drag chain but now it is clear. Nice!

    Can you take a picture with the drag chain support popped up and away? And could you post a picture with some general dimensions such as length, width, thickness, and dimensions of the wire channels?

    Thanks for sharing. Really good idea.

    David Gage
    Deep Sea Sound


  6. #6
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management

    I will put the STL files on thingiverse later. Wasn’t sure if people were interested but kept going with the idea.

    I’ve now got inserts for the 50mm wide chain and the 75mm wide chain so you can do the lot.

    I’ve put about 15 of them on the 75mm chain and the spacing seems to work ok.




    Sent from my iPhone using Tapatalk



  7. #7
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management



  8. #8
    Registered
    Join Date
    Jan 2015
    Posts
    173
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management

    Thanks so much Andrew. Looks great! I've already downloaded and will comment when I've had a chance to print.

    David Gage
    Deep Sea Sound


  9. #9
    Registered
    Join Date
    Jan 2016
    Location
    Australia
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Drag Chain Cable Management

    Here’s the little ones




    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Drag Chain Cable Management

Drag Chain Cable Management