According to the assembly manual, it's 80160.
http://www.cncrouterparts.com/cad/20..._V2016Q1_2.pdf
Hey there... Can somebody out there measure their main beam extrusion on a CNCRP Pro (all sizes are the same I think)? I suspect it's something like 2" deep x 4" tall but would love to know (might also be a metric profile).
Thanks!
Sent from my SM-G960U using Tapatalk
Similar Threads:
According to the assembly manual, it's 80160.
http://www.cncrouterparts.com/cad/20..._V2016Q1_2.pdf
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you! Much appreciated.
To those who may find this later, that's 80x160mm or around 3 1/8 x 6 1/4
Sent from my SM-G960U using Tapatalk