I have an old YCM-60A Supermax MAX-1 Rebel with a Mitsubishi Meldas M3 control. The MC1619-1 card had died and I replaced it. I initialized the card and loaded the parameters. The machine is able to now power up, but the machine is dumb. Things don't work as they should, such as: tool un-clamp and magazine controls do not work, pendant handle only works at X1, mode selector switch is all wrong, does not obey limit switches, amongst other things. Everything was working fine before the MC1619-1 card died. Is there something I am missing? Any help would be greatly appreciated.

Similar Threads: