HELP WITH SERVODE MSD200A SPINDLE DRIVER

Results 1 to 1 of 1

Thread: HELP WITH SERVODE MSD200A SPINDLE DRIVER

  1. #1
    Member MCIVETTA's Avatar
    Join Date
    Oct 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question HELP WITH SERVODE MSD200A SPINDLE DRIVER

    Hi All! I am looking for some help with a brand new SERVODE MSD200A spindle driver I bought for a Mazak VQC 20/40B retrofit.
    I have 3 axis working ok (retrofitted X,Y,Z) however I can t get the spindle driver to work. My problem is that the driver seems te be stuck in running mode and some parameters and functions cannot be modifyed in runninng mode, functions such as motor self learning (essential for the driver to determine the motor parameters, which is Fn.2.37 according to manual or parameter Pn0.000 which determines if it is controled by speed, torque o position). I already tried with the motor disconnected from the driver (encoder as well as power cables) and still it does not let me modify the mentioned paramters.
    Maybe if there is someone with experience with this driver or a similar one can give a tip.
    Thanks in advance!

    PS: ATTACHED A PICTURE OF THE MENTIONED DRIVER (I THINK IT S A GENERIC KIND OF SPINDLE DRIVER)

    Similar Threads:
    Attached Thumbnails Attached Thumbnails HELP WITH SERVODE MSD200A SPINDLE DRIVER-page_1-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP WITH SERVODE MSD200A SPINDLE DRIVER

HELP WITH SERVODE MSD200A SPINDLE DRIVER

HELP WITH SERVODE MSD200A SPINDLE DRIVER