- I80 yasnac control
-
I80 yasnac control
Hi ,If there is anyone who has adjusted for pitch error and know the yasnac i80 control..Book reads parameter 6801 for x axis ...I have a number 20000 in there right now ,I have tried range from -100 to 50000 and it does not change the error.Im loosing. 0002 per inch.
Shutting machine down for every number change...but not moving.
Thanks Jeff
-
- I80 yasnac control
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules