Weeke help and info


Results 1 to 2 of 2

Thread: Weeke help and info

  1. #1
    Member Hopefulbull's Avatar
    Join Date
    Aug 2020
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Weeke help and info

    This forum looks like it has all kinds of good technical info across many different platforms. The shop I work in has 3 Weekes. One 550 from about 2000 and two 350 form 2004. I have done a little searching, but I can't find what I'm looking for.

    Is there a Weeke specific area for searching and posting?

    I would like to use DNC on the 550. Is there any info on how to set this up?

    Sent from my SM-A136U using Tapatalk

    Similar Threads:


  2. #2
    Member Hopefulbull's Avatar
    Join Date
    Aug 2020
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Weeke help and info

    Here is a little more info.

    Machine: Weeke optimal backup 550 produced in 2002

    Currently use Homatic IPC to send programs to the controller.

    The controller is a NUM 1040C series II

    We build our programs primarily using WoidWOP 4.5 (Build 590)

    Please let me know if you need other information.

    Sent from my SM-A136U using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Weeke help and info

Weeke help and info