Need Help! SCM M100F CN1061 X axis external alarm


Results 1 to 2 of 2

Thread: SCM M100F CN1061 X axis external alarm

  1. #1
    Member Andyban2's Avatar
    Join Date
    Feb 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation SCM M100F CN1061 X axis external alarm

    We recently got a used SCM M100F CNC. at first start up we had an error on the "X" axis servo pack (encoder back up error). I was able to clear the error using the SigmaWin software.
    But now when the reset is pushed, I have no errors. Then I push white P02 (turn system on), I get CN1061 X axis external alarm. I cant find any documentation on this error and looked through all
    the electrical diagrams, and cant find anything related to this error. I'm assuming I still need to calibrate the "X" axis, but it wont let me jog any axis. any help or documentation would be greatly appreciated.

    Similar Threads:


  2. #2
    Member coc9's Avatar
    Join Date
    Jul 2018
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: SCM M100F CN1061 X axis external alarm

    Hi, so after clearing the "encoder backup error" alarm are you sure that the X axis data has not changed ? The machine works on absolute encoder system and needs the axis position to be saved and machine should not forget the position ever. When you turn the machine off, the batteries comes into play. The batteries must be changed before end of their life so that the axis data isnt lost.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SCM M100F  CN1061 X axis external alarm

SCM M100F  CN1061 X axis external alarm

SCM M100F  CN1061 X axis external alarm